This is a PSA for any pfatt users out there. PFsense 2.7 removed the functionality needed to get netgraph working. I compiled my own modules from the source and it was not enough. Upgrade to PFsense Plus and use its module to bypass or migrate OPNsense. Good luck with your decision! Maybe someone better can
Read More »
As of Writing this (2/17/22), there is a bug in the latest version of pfSense with the Intel if_em.ko driver. This is causing the pf-att script to not work. Thanks to the work of neydah700 on github, the fix was found by replacing the kernel driver with a newly compiled binary that has the issue
Read More »
I have a Dell R720xd and its default fan curve is… aggressive. Here is how i found to lower the fan speeds so its not a constant vacuum cleaner in my living room. Set fan speed properties via iDrac Enable SSH on iDrac. Connect then connect to it and run: racadm set system.thermalsettings.FanSpeedOffset 255
Read More »
Since dell so rudely removed the updates from SUM, Here is the last iso you could build from it. Just boot into it and it should install all of the firmware updates, like idrac, lifecycle controller, raid card, etc. Just be warned… it will take awhile. Enjoy https://drive.google.com/file/d/1zMoOsYS9X63TaIlHVD0uE13M4QhPcmQZ/view?usp=sharing or (If link is broken) https://angrysysadmins.tech/wp-content/uploads/2021/04/DellR710_LatestSUU.iso
oVirt is a great product, and it’s hosted engine is a great concept. It is a mostly automated deploy of a VM containing the oVirt Hosted Engine and the initial setup of your first host. This is similar to how VMware and XCP-ng/XenServer does it, however the default install method of the hosted engine tries
Read More »